acf-50 anti corrosion and corrosion block grease
***NEWS FLASH***
HAVE YOUR BIKE
PROFESSIONALLY TREATED
WITH ACF-50 ANTI CORROSION FOGGING SPRAY
|
|
ACF-50 IS SUPPLIED VIA A HIGH PRESSURE SPRAY GUN WHICH ATOMISES THE ACF-50 INTO A FINE MIST. THIS IS THEN APPLIED TO THE BIKE VIA A FLEXIBLE MULTI DIRECTION SPRAY NOZZLE |
|
|
THE ACF-50 IS APPLIED TO THE BIKE WITH A FLEXIBLE MULTI DIRECTIONAL NOZZLE THE SMALL DIAMETER OF THE FLEXIBLE PIPE ALLOWS US TO TREAT BIKES WITH FAIRINGS WITH NO NEED FOR PANEL REMOVAL |
|
|
![]() |
|
TREATING YOUR BIKE REGULARLY WITH ACF-50 WILL KEEP YOUR BIKE IN TOP CONDITION AND HELP MAINTAIN ITS FUTURE VALUE ROAD DIRT CLEANS OFF MUCH EASIER ACF-50 KILLS RUST ON CONTACT REMAINS ACTIVE FOR 6-12 MONTHS FIGHTING CORROSION AND NEUTRALISING SALT CONTACT US ON 0151 924 2369 TO HAVE YOUR BIKE PROTECTED BY ACF-50 FOR ONLY £35.00 |
![]() |
WE OFFER A
FAST AND EFFICIENT
MAIL ORDER SPARES SERVICE



£12.50
ANTI CORROSION SPRAY 13oz AEROSOL
POSTAGE & PACKING
CHARGES
ONE ACF-50 AEROSOL £4.50
TWO ACF-50 AEROSOLS £6.50
THREE OR MORE ACF-50AEROSOLS £10.00
FREE POSTAGE & PACKING ON ALL ORDERS OVER £100
POSTAGE CHARGES ARE ADDED DURING CHECK OUT PROCESS





BRIDGE ROAD M/CS FULLY ENDORSE
ACF-50
WE USE THIS PRODUCT ON OUR OWN BIKES AND IN OUR WORKSHOP
WE ALSO AVAILABLE
ACF-50 IN 1L BOTTLES WITH SPRAY PUMP

CORROSION BLOCK GREASE TUBS & TUBES
IF YOU RIDE A MOTORCYCLE OR SCOOTER IN THE UK YOU WILL BENEFIT FROM USING ACF-50 SPRAY TO PROTECT YOUR BIKE FROM SALT AND WATER CORROSION
ACF-50 (ANTI CORROSION FORMULA) WAS ORIGINALLY DESIGNED TO PROTECT AIRCRAFT FROM EXISTING AND NEW CORROSION AND IS NOW AVAILABLE FOR MOTORCYCLISTS.
AVIATION PRODUCTS HAVE TO MEET RIGOROUSLY HIGH STANDARDS & ACF NOT ONLY MEETS THESE BUT HAS BEEN AWARDED AVIATION APPROVALS - MIL-SPEC 81309 TYPES 2 & 3 WHICH MEANS IT IS APPROVED FOR FERROUS AND NON FERROUS METALS, ELECTRICAL SYSTEMS AND ELECTRONIC COMPONENTS.
FACTS ABOUT ACF-50
CHEMICALLY NEUTRALISES THE CORROSIVE EFFECTS OF ROAD SALT
EASILY APPLIED NON DRYING, ULTRA THIN CLEAR FILM
CONTAINS NO WATER, SILICON, TEFLON OR WAX - NO STICKY BUILD UP, NO RISK OF EXISTING CORROSION BEING SEALED IN
ACTIVE - WHICH MEANS THAT IT CREEPS AND KEEPS ON WORKING
DOESN'T NEED REAPPLYING AFTER
EVERY WASH
UNDER SEAT/TANK AREAS, ON ELECTRICS ETC ACF WILL LAST UP TO 12 MONTHS.
ON MORE
EXPOSED AREAS TREAT AS NECESSARY
ECONOMICAL - 95% PRODUCT A LITTLE GOES A LONG WAY- LASTS AGES
SAFE TO USE ANYWHERE ON THE BIKE
AVOID BRAKES AND TYRES THOUGH!
ENHANCES THE LOOK OF THE BIKE AND BRINGS BLACK TRIM UP A TREAT
|
Where to use it Its
uses on motorcycles are very similar to those on aircraft. Sprayed
into the structure, joints and welds i.e. under the tank and seat,
frame and steering head area (where the corrosion works away
un-noticed), under panels and on hidden parts of the engine,
radiators, engine cases, forks, callipers, wheels, anywhere on the
bike really because it will work hard to prevent corrosion and
structural degeneration. Where corrosion is already evident it will
help inhibit further progress by insulating and electrically
‘switching off’ the corrosion cell. It will also penetrate around
bolts, screws and hardware protecting them and preventing seizure.
Exposed
engine and gearbox cases, swinging arms, forks and other exposed parts
will benefit from ACF-50’s thin film technology by not corroding,
will stay looking good and will clean up easily after a salt laden
ride. I also find it
excellent on black plastic trim without the residue of silicon.
It will protect electrical joints, plugs and components and prevent corrosion causing high resistance joints. This goes for PCB’s and electronics as well, such as computerised ignition and fuel control units and their multi pin plugs, while switches, controls and levers will all be lubricated as well as protected from corrosion. Multi pin plugs and connectors benefit from having ACF-50 applied directly to the contacts. It’s uses are unending, you will love it!
Remember, ACF-50 protects jets on US aircraft carriers! If it works for these jets in these conditions, think how well it's going to work for your bike! |
Also
Introducing Corrosion Block Grease!
Provides maximum protection in
extreme conditions, strongly resisting water washout. Its formula provides both
high and low temperature performance, increasing the life of critical
components. Excellent for brake calliper sliders and pins.
BRIDGE ROAD M/CS FULLY ENDORSE
ACF-50
WE USE THIS PRODUCT ON OUR OWN BIKES AND IN OUR WORKSHOP
1ST OFFICIAL ACF-50 MOTORCYCLE TREATMENT
CENTRE IN THE UK




